one. Function Introduction:

·Wireless wall monitoring alarm is equipped2Emergency buttons for triggering ports, which respectively trigger power outages and incoming calls.

There is a power outage receiving end12VOutput port, can be connected12VAlarm lamp. ）

2The circuit switch triggers the port, and the receiver can jog the output switch.

two. Technical Indicators:

·Launch alarm distance ≥500rice—1500Rice (depending on the environment)

·Power load capacity: Sending alarm status: ≤800mA.　

·Usage conditions: Indoor usage temperature: -30°C ~ +50°CHumidity:≤85%.

three.Usage:

1,According to the monitoring of the power supply, the alarm detects a power outage signal and sends the alarm signal to the host (the transmitter lights up in red).

The encoding operation between the extension and the host is completed through pin insertion.

Install the extension in a suitable location, attach the antenna, plug the AC power into the mains, turn on the DC backup power switch, and set the external power according to user needsfluteThe sound duration is 1 minute, 2 minutes, and 4 minutes

The power on operation indicator light of device 4 is green and always on, indicating that the unit has entered the running state.

4、 Attention:

1. The installation location of the transmission extension is high-rise reinforced concrete buildings, metal structures, and basements. When using a lot of metal materials for decoration, it may affect the transmission effect of the transmission signal. It is recommended to lead the transmission antenna outdoors or use an outdoor antenna (purchased separately).

2. The fluctuation range of the power supply voltage must not exceed the specified requirements in order to ensure the normal operation of the system and the safety of the machine.

3. Regularly conduct routine tests to check if they are functioning properly, and promptly troubleshoot any malfunctions to prevent theft from going unnoticed and causing losses.