Product Introduction
AmericaSensidyne NephelometerThe real-time dust tester can display dust concentration in real time, set sampling intervals, and store data.

-The Nephelometer model from SENSIDYNE Corporation in the United States is a lift type real-time sensorDust monitoring device,Accurately measuring dust concentration using light scattering technology
-Range: 1-10000 μ g/m3, resolution: 1 μ g/m3. Sampling interval from 60 seconds to 15 minutes STEL or continuous sampling
-Equipped with a built-in air pump and designed with an ISO Kinetic sampling inlet, it generates a "sheath like" air flow to guide the sample into the particle probe like a stream of particles
-Multiply each measurement by a K coefficient and display it in real-time on the instrument. After each sampling, the K coefficient, environmental factor name STEL、 The maximum, minimum, and average values will be recorded in the instrument memory
-A total of 4000 sets of data can be saved. When the instrument is connected to a computer, the memory data can be exported to a spreadsheet.

|
range |
0.1~10,000μg/m3 |
|
resolution |
1μg/m3(0.001mg/m3) |
|
sensitivity |
1μg/m3(0.001mg/m3) |
|
accuracy |
±5% |
|
measuring principle |
light scattering |
|
Sampling method |
Suction type |
|
Sampling Options |
1Separate, continuous or15divideSTEL |
|
data record |
4,000Records, includingSTEL、MAX、MINThe average reading andKcoefficient |
|
operate temperature |
0℃-50℃ |
|
storage temperature |
-20℃-60℃ |
|
size |
9.5x17.2x5.1cm |
|
weight |
0.67kg |
|
power supply |
7.2VLithium ion battery pack, providing30Hour by hour operation and12Continuous use for hours |
|
charging time |
Less than3hour |
