Drinking tap water nitrate excess treatment equipment
China has vast territory and abundant resources, with differences in different regions. Especially in terms of drinking water, some areas have tap water with various indicators exceeding national standards.
According to the national standard for tap water, the nitrate content is 20mg/L. However, in some areas, if the standard cannot be met, it is necessary to deal with the excessive nitrate content in tap water. Qianjing nitrate treatment equipment, specializing in solving the problem of excessive nitrate in municipal tap water.
Process flow of nitrate excess purification water treatment:
Municipal tap water - booster pump - pre filter - nitrate processor - standard tap water to water tank
Technical parameters related to nitrate water treatment equipment:
1. Processing water volume
2. Nitrate content and other water quality components in the influent;
3. What standards are reached after processing
4. Periodic water production capacity
Selection and specification of nitrate water treatment equipment
The commonly used processing specifications of this equipment are 1-100 tons/hour, which is a non-standard equipment. Please feel free to call Qianjing Company for consultation.
Data on nitrate removal equipment for tap water
1Basic functions and characteristics of nitrate removal equipment for tap water
1Directly extract nitrate from tap water or groundwater throughQX type nitrate filtration equipment for removal;
2Fully automatic regeneration operation, no need for dedicated personnel to operate;
30-99 days or 0-99 hours to freely set the regeneration time;
4Configure a recycled salt tank with a salt solubilizer;
5Low land area and low regeneration energy consumption;
6Easy to install, convenient to use, one click operation;
IIQX Nitrate Filter Selection Table
model |
water production |
operation mode |
Device dimensions Diameter M |
import and export size |
material |
Number of fillers L |
Price |
QX-1TG |
1T/H |
fully automatic |
0.2 |
DN25 |
304 stainless steel |
50 |
|
QX-3TG |
3T/H |
fully automatic |
0.35 |
DN25 |
304 stainless steel |
125 |
|
QX-5TG |
5T/H |
fully automatic |
0.6 |
DN32 |
304 stainless steel |
300 |
|
QX-8TG |
8T/H |
fully automatic |
0.8 |
DN50 |
304 stainless steel |
800 |
|
QX-10TG |
10T/H |
fully automatic |
1.0 |
DN63 |
304 stainless steel |
1200 |
|
QX-15TG |
15T/H |
fully automatic |
1.2 |
DN63 |
304 stainless steel |
1700 |
|
QX-20TG |
20T/H |
fully automatic |
1.5 |
DN75 |
304 stainless steel |
2500 |
|
QX-25TG |
25T/H |
fully automatic |
1.6 |
DN75 |
304 stainless steel |
3000 |
|
QX-30TG |
30T/H |
fully automatic |
1.8 |
DN80 |
304 stainless steel |
3800 |
|
QX-35TG |
35T/H |
fully automatic |
2.0 |
DN90 |
304 stainless steel |
4700 |
|
QX-40TG |
40T/H |
fully automatic |
2.1 |
DN90 |
304 stainless steel |
5200 |
|
QX-45TG |
45T/H |
fully automatic |
2.2 |
DN100 |
304 stainless steel |
5700 |
|
QX-50TG |
50T/H |
fully automatic |
2.3 |
DN150 |
304 stainless steel |
6200 |
Model Description:
QX-50TG
Q: Representative brand: Qianjing X Representative: Nitrate processor; 50T represents processing capacity of 50 tons/H, G represents: national standard
IIITechnical parameter configuration of tap water nitrate removal equipment
Basic parameters of nitrate filtration equipment |
Basic configuration of nitrate treatment equipment |
||
Device Name |
QX nitrate processor |
Main equipment of nitrate processor |
1 set |
Design water source |
Tap water or groundwater |
Fully automatic controller |
1 set |
Rated inlet pressure |
0.2-0.5MPA |
Regenerated salt tank (including salt solubilizer) |
1 set |
Range of work pressure |
0.2-0.5MPA |
Nitrate treated materials |
1 set |
Design water inlet hardness |
<100mg/L |
Salt suction pipe and filter screen |
1 set |
Design water hardness |
<0.03mmol/L |
Central pipe and water distributor |
1 set |
Water source utilization rate |
>96% |
Bottom equipped with screen mesh water distribution device |
1 set |
Operating temperature |
10-40℃ |
||
4Application scope of tap water nitrate removal equipment:
1The nitrate in tap water or groundwater exceeds the standard and does not meet the national standard for tap water; Normally, the nitrate content in tap water should not exceed in the national standard20PPM, That is, below 20mg/L.
2Use of nitrate removal for residential water in the community;
3Other measures will be taken to address situations where hydrochloric acid exceeds the standard.
5Treatment characteristics of each unit of the tap water nitrate removal equipment:
1The equipment adopts a fully automatic controller, and the regeneration time can be freely set according toDesign and regenerate within 0-99 hours or 0-99 days.
2Using high-performance specialized nitrate removal materials, with large filtration capacity, low salt consumption, and high cost-effectiveness; Long service life of materials;
3Configure a dedicated regeneration salt tank, equipped with a salt container, filter screen, etc.
4Material requirements for nitrate removal equipmentFRP fiberglass or stainless steel materials are optional.
5Pre filters can be added appropriately according to the situation.
Report on the excessive nitrate content in drinking tap water, equipped with a clean nitrate ion exchange device, specializing in the treatment of excessive nitrate content.
Example: The nitrate content in the tap water of a residential area in a certain region exceeds the standard, and the water quality report is as follows
According to this water quality report, Qianjing will treat the unqualified items in the water to meet the standard, with a treatment capacity of 500 tons per day.
What should I do if the nitrate in municipal tap water exceeds the standard? Qianjing provides you with a nitrate water treatment system, which specializes in treating excessive nitrate in tap water or groundwater, and meets drinking water standards after treatment.
Tap water iron removal equipment tap water manganese removal equipment tap water fluoride removal equipment
