1、 Jingtai SD-C50 Non destructive Wood Moisture Tester Introduction to Wood Moisture Meter

This wood moisture meter is an induction type, digital moisture measuring instrument developed by introducing advanced foreign technology. The instrument adopts the high-frequency principle, digital display, and integrates sensors with the main machine. It has 10 gears for measuring the moisture content of different tree species. This instrument has high accuracy in measuring moisture, and is small in size and light in weight, making it portable for on-site testing. It is an ideal instrument for detecting moisture in the production process of the wood industry.

2、 Jingtai SD-C50 Non destructive Wood Moisture Tester - Characteristics of Wood Moisture Meter

1. Wide measurement range

The instrument is suitable for measuring the moisture content of raw wood, dried wood, and various wood products over a wide range, with a measurement range of 0-100%.

2. Portable

The instrument weighs about 200g and is about 160mm long, suitable for on-site use and easy to carry.

3. Do not damage the detected object

Simply gently touch the probe onto the surface of the object being measured without damaging it, and the electromagnetic wave can reach the middle of the wood for moisture measurement. Even if the surface is treated, it can still be accurately measured.

Visually measure the depth of 50mm in the wood and display the average moisture content inside it.

4. A simple and efficient tree species correction mechanism

It can ensure that the instrument compensates for the moisture content measurement of various tree species and improve the accuracy of the measurement.

3、 Jingtai SD-C50 Non destructive Wood Moisture Tester - Measurement Principle of Wood Moisture Meter

This product utilizes electromagnetic waves to measure the electrical conductivity of the object being tested at a depth of approximately 50mm. And calculate the intermediate value of its measurement in an instant to simulate it. In addition, due to the use of high-frequency measurement principles, it will not harm the surface of the object being measured.

4、 Jingtai brand SD-C50 non-destructive wood moisture analyzer - Technical parameters of wood moisture analyzer

Measurement method: High frequency electromagnetic wave induction type

Display mode: LCD digital display

Measurement depth: approximately 50mm

Measurement range: 0-99%

Resolution: 0.1%

Accuracy: ± 0.5% (0-50%); ±1%(50-99%)

Operating environment temperature: -5 ℃ -60 ℃

Tree species correction: 10 segment knob

Power supply: 1 9V battery

Size: 160 × 60 × 27 (mm)

Weight: 200g

5、 Jingtai SD-C50 Non destructive Wood Moisture Tester - Operating Method for Wood Moisture Meter

1. Turn the gear knob to the position of the measured tree species (refer to the tree species gear table), and for other tree species, please select the corresponding gear based on their specific gravity.

2. Handheld instrument, (probe should not come into contact with the measured object) Press the ON button on the switch, and if the LCD display is within 00.0 ± 0.5, the instrument is in a measurable state; If it is not within this range, slowly adjust the zero adjustment knob (ZERO) to make the displayed number on the LCD screen within 00.0 ± 0.5.

3. The instrument round head (sensor) contacts the surface of the wood in a straight line, and the displayed value after the number stabilizes is the moisture content of the wood.

Jingtai Instrument Knowledge:The non-destructive wood moisture analyzer is a good helper for measuring moisture in the wood, furniture, flooring, and wooden door industries. It has no destructive effect on the surface of wood and can measure normally even if the wood surface has been painted. There are many alternative names for induction type wood moisture meters, such as induction type wood moisture meter, non-destructive wood moisture meter, electromagnetic wave induction wood moisture meter, non-destructive furniture moisture meter, high-frequency wood moisture tester, and so on.