VIP member
PAP temperature and humidity control type
Product specification table PAP1A1-K type PAP05A1-FKPAP10A1-KPAP10A-KPAP10A1-FKPAP10A1-FKPPAP20A-FKPAP20A-KPPAP20A-FK Performance setting Possible tem
Product details
Product specification table
PAP10A1-K
| Type | PAP05A1-K | PAP05A1-FK | PAP10A1-K | PAP10A1-FK | PAP20A-K | PAP20A-FK | ||
| performance | Set possible temperature and humidity range ※ 1 | ℃,% | 18 ～ 30,40 ～ 65（75） | |||||
| Temperature and humidity control accuracy ※ 2 | ℃,% | ± 0.1, ± 1.0 | ||||||
| 冷却＋加熱能力 （50/60Hz） | kW | 2.3 ／ 2.6 | 4.7 ／ 5.3 | 9.4 ／ 10.5 | ||||
| (Maximum cooling capacity) | (kW) | (1.6) ／ (1.8) | (3.2) ／ (3.6) | (6.5) ／ (7.2) | ||||
| Freeze processing air volume | ㎥/min | 3 ～ 5 | 7 ～ 10 | 13 ～ 20 | ||||
| Maximum external static pressure ※ 3 | Pa | 110 | 620 | 250 | 560 | 250 | 690 | |
| environmental conditions | Weekly temperature and humidity range (air absorption) | ℃,％ | 15 ～ 35,30 ～ 70 | |||||
| Absorption temperature fluctuation hook | ℃/h | Within ± 1 | ||||||
| 吸込湿度変化勾配 | ％/h | Within ± 5 | ||||||
| External dimensions (height * depth * width) * 4 | mm | 1589×800×650 | 1810×800×650 | 1798×940×664 | 2203×940×664 | 1863×1150×820 | 2263×1150×820 | |
| product quality | kg | (190) | (215) | (235) | (280) | (370) | (445) | |
| Control the air vent | mm | φ 100 | φ 100 HEPA Built in filter | φ 150 | φ 150 ※ 5 HEPA Filter box | φ 200 | φ 200 ※ 5 HEPA Filter box | |
| Humidified water | water quality | Pure water (electrical conductivity 1-10) μ S ／ cm） | ||||||
| Maximum humidification capacity ※ 6 | kg/h | 2.5 | 5.0 | 10.0 | ||||
| Supply temperature range | ℃ | 10 ～ 40 | ||||||
| Supply pressure range | MPa | 0.1 ～ 0.5 | ||||||
| Receiving caliber | Rc1/4 | |||||||
| Humidification air | 最大消費量 ※7 | NL/min | 23 | 38 | 80 | |||
| Supply temperature range | ℃ | 20 ～ 40 | ||||||
| Supply pressure range | MPa | 0.40 ～ 0.93 | ||||||
| Receiving caliber | Rc1/4 | |||||||
| Electrical Characteristics | Power supply ※ 8 | V(Hz) | Three phase 200 ± 10% (50/60) | |||||
| Consumption of electricity ※ 9 | kW | 1.6 | 2.2 | 4.5 | ||||
| Current ※ 9 | A | 6.6 | 8.0 | 16.0 | ||||
| Power capacity ※ 10 | kVA | 2.3 | 2.8 | 5.6 | ||||
| Sound value (50/60Hz) * 11 | dB | 66/68 | 73/73 | 70/70 | 75/75 | 72/72 | 78/78 | |
| Operational control mode | Heat pump balance control | |||||||
| refrigerant | R410A | |||||||
| Output of refrigeration compressor | kW | 0.7 | 1.7 | 3.0 | ||||
* it does not represent the controllable temperature and humidity range. The controllable temperature and humidity range depends on the suction air temperature and humidity. (the humidity humidity range is 65 to 75%.)
* 2 suction air temperature and humidity stability. Discharge point 1, controller display value accuracy. 3. External air pressure when the engine is operated with the maximum rated processing air volume. * 4 height includes discharge port.
※ 5HEPA The filter box is separated from the main body, so it is necessary to install it. 6 maximum humidity during operation. 7 please provide clean compressed air processed by filter. The cleanliness of the compressed air should be based on the cleanliness required in the air blowing area. 8. 9 maximum value within the specification range.
10 maximum operating current within the range. * it is possible to reduce the noise value by attaching the muffling duct.
Please note that the connection duct must be insulated from the insulated duct. (recommended m Within
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-