line mixer-Global supplier

Room 106, Building 3, China Yixing International Environmental Protection City, No. 66 Far East Avenue, Gaocheng Town, Yixing City

Product Introduction:

A tubular static mixer is an ideal equipment for instantaneous mixing of water with coagulants, coagulants, and disinfectants. It has the characteristics of efficient mixing, drug saving, and small equipment. It is composed of two sets of mixing unit components. Without the need for external power, the water flow through the mixer produces three effects: diversion, cross mixing, and reverse swirl, with a mixing efficiency of 90-95%.

Design data:

(1) The diameter of the mixer pipe is selected according to the economic flow rate, generally calculated at 0.9-1.2 meters per second. For pipes with a diameter greater than 500 millimeters, the flow rate can reach 1.5 meters per second. When conditions permit, enlarging the pipe diameter by 50-100 millimeters can reduce head loss.

(2) The basic combination of mixer sections is considered as three sections, with a head loss of about 0.4-0.6 meters. The number of sections can also be increased or decreased according to the condition of the mixed medium.

(3) The water pressure inside the mixer tube is considered to be 1.0 kg/cm2, or the equipment can be processed according to the actual pressure.

Design parameters:

pipe diameter	Medication dispensing port	Pipe length	Flange size (mm)					Screw hole	Screw hole	velocity of flow	internet traffic	total loss	weight
(mm)	(mm)φ	(mm)	Flange size (mm)					quantity	diameter	(m3/S)	(m3/S)	（m）	Kg
			D 0	D	D 1	D 2	b	n	φd
200	25	1100	219	340	295	265	24	8	23	＜1	0.03	0.076	150
250	25	1400	273	395	350	320	26	12	23	＜1	0.05	0.079	206.25
300	25	1650	325	445	400	368	28	12	23	＜1	0.073	0.076	225
350	25	1800	377	505	460	428	28	16	23	＜1	0.1	0.4	281.25
400	25	2200	426	565	515	482	30	16	25	＜1	0.13	0.67	350
450	25	2400	480	615	565	532	30	20	25	＜1	0.165	0.65	481.25
500	32	2600	530	670	620	585	32	20	25	＜1.5	0.305	0.91	687.5
600	32	3400	630	780	725	685	36	20	30	＜1.37	0.4	0.76	993.75
700	32	3600	720	895	840	800	36	24	30	＜1.56	0.6	0.98	1293.75
800	40	4200	820	1010	950	995	38	24	34	＜1.59	0.8	1.01	1562.75
900	40	4500	920	1110	1050	1005	42	28	34	＜1.57	1	0.99	1775
1000	65	5000	1020	1220	1100	1115	44	28	34	＜1.53	1.2	0.94	2562.5
1200	85	6000	1220	1450	1380	1325	48	32	41	＜1.6	1.4	1.03	a

Installation:

(1) The installation of the mixer is not limited by direction and can be done horizontally, vertically, or in other combinations.

(2) When the mixer is installed in an overhead pipeline, it must be fixed with pipeline brackets, and buried pipelines can be installed in inspection wells.

(3) The pipeline for adding chemicals can be self-designed and installed according to the national water supply and drainage standard diagram, but the flow velocity inside the pipeline must be greater than 1.0 m/s and the pressure inside the pipeline should be less than 2.0 kg/cm2.

(4) The feeding position of various drugs should be at the front end of the pipeline mixer and greater than 0.3 meters.

Ordering Notice:

Ordering requires specifying the specifications, quantity, etc. of the required pipeline mixer.