：

Rotary drum water cooler is mainly used for cooling products after drying (calcination), and is widely used in cement and chemical industries，Metallurgy,Mining, building materials and other industriesIndustry.Especially suitableIn situations where the production volume of the product is high.

The equipment is cooled by a cooling cylinderBody, cooling jacket and rotary cylinder support transmission devicerack、Electrical control and other components.

The high-temperature product after calcination (drying) uniformly falls into the rotary cylinder. The cooling water flows back into the outer jacket of the cooling cylinder. The material comes into contact with the cooling cylinder during continuous rolling and forward movement. So that the high-temperature product transfers heat to the cooling water, the product temperature is cooled, and it becomes a qualified product at the discharge end and is discharged.

Equipment structure:

The equipment consists of a cooling cylinder, a cylinder cooling jacket, sealing covers at both ends of the cylinder and inlet and outlet ports, a cylinder roller support mechanism pair, a cylinder large gear, a small gear transmission pair, a motor, and a reducer transmission system. Rack composition.

：

The equipment is for continuous production. High degree of automation. The front end can be connected to the dryer (calcination machine), and the back end can be connected in series with the packaging system to form a complete setpipelineAutomated production line.

- The device temperature is controllable and easy to control. Can conduct laboratory tests on actual products,Using different temperatures to control the degree of calcination of the product.

The device is operated under micro negative pressure. The operating environment of the equipment is good. The workshop has less dust.

The equipment system uses very little air, so the dust removal pressure is very low. pollution-free.

The equipment has high cooling efficiency and uniform cooling effect. Good cooling effect.

---The cooling time of the product inside the device is controllable. It can take from ten minutes toSeveral tens of minutes, making it easy to adjust the cooling temperature of the product.

：

Alumina catalyst, photovoltaic material. silica gel. Activated carbon. catalyzer. Metal oxides, non-metallic oxides. Phosphates, alum, granular zinc oxide and other products.

：