The quick opening drawer flame arrester is suitable for storing Class A oil products with a flash point below 28 ℃ and Class B oil products with a flash point below 28 ℃. It is also suitable for storing materials on dome shaped tanks sealed with nitrogen gas. Quick opening drawer type flame arresters are generally used in conjunction with breathing valves to achieve better results.

Schematic diagram of explosion-proof corrugated board:

Maintenance and repair:
• It should be checked every six months. Check whether the fire-resistant layer has defects such as blockage, deformation, or corrosion;
• Clean the blocked fire-resistant layer thoroughly to ensure that each hole is unobstructed. Replace any deformed or corroded fire-resistant layer;
• When cleaning the flame arrester core components, high-pressure steam, non corrosive solvents, or compressed air should be used for blowing, and sharp hardware scrubbing should not be used;
• When reinstalling the fire-resistant layer, the gasket should be updated and the sealing surface should be confirmed to be clean and undamaged, without any air leakage.
Ordering Notice:
Please specify detailed parameters such as product name, nominal diameter, pressure rating, material, flange standard, etc. when placing an order. The above product parameters are for reference only. Our company can order processing according to user requirements. Please feel free to call or write to us.