RFID high-frequency HFRemote RFID reader/writerHR9826 is a high-performance ISO/IEC 15693 protocol electronic tag reader/writer with a working frequency of 13.56MHz and an output power of up to 4W. It has two SMA antenna interfaces and RS232 and RS485 data interfaces. It can be widely applied in various RFID system application fields, such as high-value medical device drug supervision, bingo ball management, confidential document management, intelligent consumables cabinet, library management, conference attendance management, anti-counterfeiting traceability, jewelry management, self-service laundry service, production process control, etc.

Related solutions: RFID intelligent industrial production line

RFID characteristics

Supporting protocols: ISO/IEC 15693, ISO 18000-3;

Output power: 4W or above;

Working frequency: 13.56MHz;

Secondary development: Provide dynamic link libraries (DLLs) and demo software source code;

Support antenna on/off extreme environments; Support scanning working mode ①;

Support transparent command format operations ②; Support addressable multi antenna ports;

Support dual parsing mode for electronic tags ③; Support multi reader/writer networking;

Advanced tag collision processing algorithm, high recognition rate, typical tag processing speed exceeding 80 sheets per second;

Two standard SMA interfaces can be directly connected to a 50 Ω standard RFID antenna, with an effective distance of over 90cm;

① Scanning working mode: an automatic working mode of the reader/writer;

② Transparent command: a high-end feature equipped to complement and support the new features of future tags and the unique features of tags from various manufacturers;

③ Dual parsing mode: In the case of multiple labels, the tag collision processing algorithm of the reader/writer includes two types: DPPM and WPPM;

*Effective distance and protocol format are related to external antennas, electronic tags, and working environment.

interface parameters

Standard RS232 interface:

J3-1: G_IN1 TTL level universal input port, with an internal 20k Ω resistor pulled up to+5V;

J3-2: TXD (R -) RS232 serial data output (RS232 interface valid) or R - (RS485 interface valid);

J3-3: RXD (R+) RS232 serial data input (RS232 interface valid) or R+(RS485 interface valid);

J3-4: G_OUT1 TTL level universal output port, maximum load current 0.5mA;

J3-5: GND ground;

J3-6: G0UT2 TTL level universal output port, maximum load current 0.5mA;

J3-7: COMMON built-in relay common terminal;

J3-8: N_C built-in relay normally closed end;

J3-9: N_O built-in relay normally open;

For more detailed parameters, please refer to the PDF document link below.

physical properties

Size: 215mmx138mmx39mm;

Weight: 1100g;

Electrical characteristics

Power supply voltage: 12.6V maximum 15V;

Working current: 1.2A;

Related solutions: RFID conference attendance and sign in

Related solutions: RFID intelligent bookshelf management system

Related solution: RFID new retail intelligent retail cabinet

Related solutions:RFID Smart Store Jewelry Management Solution

Application case: RFID high-frequency reader applied to yarn tube management in the textile industry

Application case: RFID high-frequency reader applied to intelligent industrial production lines

Introduction to RFID Hardware

The RFID Ultra High Frequency (UHF) Android (Android 8.1 (periodic upgrade)) handheld terminal MT50A is equipped with an 8-core 2.0GHz high-performance processor, combined with the Android 8.1 (periodic upgrade) system, equipped with 2GB RAM and 16GB ROM memory, as well as a 5.5-inch IPS high brightness screen, optional barcode (one-dimensional or two-dimensional), RFID low-frequency (125KHz), high-frequency (13.56MHz), and ultra-high frequency (902-928MHz) high-performance modules. All six sides can withstand the impact of falling from a height of 1.5 meters to a cement floor, with an IP rating of up to IP65. It can be widely used in various wireless radio frequency identification (RFID) systems such as logistics and express delivery, equipment inspection, fixed asset management, medical care, anti-counterfeiting and traceability, product quality inspection, water and electricity meter reading, clothing ordering, mobile sales operations, etc.

RFID Ultra High Frequency (UHF) Android (Android 8.1 (periodic upgrade)) Handheld MT50A

RFID National Standard Military Standard Multi purpose RFID Ultra high Frequency Industrial Handheld Data Terminal PDA '>Handheld MT3, equipped with an eight core high-performance processor, combined with Android 9.0 (periodically upgraded) operating system, barcode (one-dimensional or two-dimensional), RFID high frequency (13.56MHz), ISO15693 card reading distance up to 30cm, ultra-high frequency (902-928MHz high-performance based on IMPINJ R2000 chip deep development) module, standard recognition distance up to 20 meters, can support national standard GB29768 protocol, military standard GJB7377.1A-2011/2018 protocol, WIFI 2.4G/5G dual band, 4G full network, GPS。 It can be widely used in various wireless radio frequency identification (RFID) systems such as confidential file management, equipment inspection, fixed asset management, medical care, anti-counterfeiting traceability, product quality inspection, warehouse management, mobile operations, etc.

RFID National Standard Military Standard Multi purpose Handheld Phone MT3

RFID high-frequency high-power electronic tag reader/writer HR7718 is a high-performance ISO/IEC 15693 protocol electronic tag reader/writer, with a processing speed more than 60% faster than analog signals, and a software adjustable RF output power of 0.5-5W. Widely used in new retail unmanned vending cabinets, drug consignment cabinets, intelligent filing cabinets, product positioning, test tube reagent management, intelligent book cabinets, intelligent filing cabinets, industry confidential document management, fluent shelves, jewelry management, conference sign in, self-service laundry services, production process control and other RFID system application fields.

RFID high-frequency high-power electronic tag reader/writer HR7718

The RFID high-frequency 13.56MHz intelligent filing cabinet electronic tag reader/writer HR7748 is a high-performance ISO/IEC 15693 protocol electronic tag reader/writer. It adopts a fully digital signal processing design, with a processing speed more than 60% faster than analog signals. The RF output power is 0.5-5W and can be adjusted by software. It can be widely used in new retail unmanned vending cabinets, intelligent filing cabinets, drug consignment cabinets, intelligent filing cabinets, product positioning, medical consumables management, test tube reagent management, confidential document management, fluent shelves, jewelry management, self-service laundry services, production process control and other RFID system application fields.

RFID high-frequency 13.56MHz intelligent filing cabinet electronic tag reader/writer HR7748

RFID high-frequency industrial integrated reader/writer head HR2878, with a card reader operating frequency of 13.56MHz, supports reading tags that comply with the ISO/IEC 15693 protocol format, and can read and write complete data block data. Adopting copper nickel plated material shell, high protection level, RS232 and RS485 data interfaces, supporting industrial MODBUS RTU and other communication protocols, convenient for users to integrate into PLC and other control systems. Mainly used in industrial production lines, mold management, tool management, warehouse management AGV、 Various RFID system application fields such as anti-counterfeiting traceability, logistics sorting, and production process control.

RFID high-frequency industrial integrated read-write head HR2878

The RFID high-frequency intelligent display cabinet shielding antenna HA4232 is a high-performance 50 Ω standard impedance 13.56MHz high-frequency metal shielding antenna. The standard SMA interface supports ISO/IEC 15693 protocol electronic tag readers with a maximum power of 6W, and the sensing distance can reach 55cm. It is widely used in various wireless radio frequency identification (RFID) systems such as catering management (smart disks), self-service book borrowing and returning machines, conference sign ins, book sorting lines, production line management, confidential file recognition, jewelry management, new retail, mini libraries, drifting bookcases, intelligent file cabinets, license management, intelligent reagent cabinets, laboratory reagent management, intelligent display cabinets, counter commodity display management, voucher seal card management, medical high-value consumables management, etc.

RFID high-frequency intelligent display cabinet shielding antenna A4232

The RFID high-frequency IC card issuer HR9002 is a countertop electronic tag reader/writer with a working frequency of 13.56MHz. It supports ISO/IEC 15693 protocol electronic tags and USB powered USB communication. It can be widely used in various wireless radio frequency identification (RFID) systems such as electronic tag data input, IC card issuance, member management, library management, logistics management, personal identification, conference sign in system, access control system, anti-counterfeiting traceability system, and production process control.

RFID high-frequency IC card issuer HR9002

The RFID ultra-high frequency industrial grade reader UR5306 is a high-performance UHF ultra-high frequency electronic tag all-in-one machine that supports electronic tags that comply with EPCglobal UHF Class 1 Gen 2/ISO 18000-6C ISO 18000-6B standards. It supports multiple user interfaces such as RS232 and RS485 and is widely used in various RFID system application fields such as industrial production lines, fixed asset management, mold management, tool management, AGV positioning, anti-counterfeiting traceability, logistics sorting, and production process control.

RFID ultra-high frequency industrial grade integrated reader/writer UR5306

The RFID high-frequency HF book adhesive label HT6507 is a specialized tag for high-frequency book archive management, with a working frequency of 13.56MHz and ISO/IEC 15693 protocol. It adopts a unique tag antenna design and can read multiple tags over long distances. It is widely used in library management, intelligent archive cabinets, unmanned retail, asset management, clothing management, production line management, equipment inspection and other fields.

RFID high-frequency HF book adhesive label HT6507

RFID high-frequency intelligent shelf HZHJ is developed for industries that require strict supervision of important items such as reagents, samples, medical consumables, non-metallic products, accessories, material boxes, etc. Using the 13.56MHz high-frequency ISO/IEC15693 protocol reader/writer HR7768, it accurately locates items to each layer. The intelligent shelf does not require signal shielding, and there is no recognition area outside the shelf. Combined with the backend management system, it can view real-time information about items on the shelf and customize various statistical reports according to customer requirements. Combining identity recognition technology can determine the information of personnel who receive and place items.

RFID intelligent shelf

The RFID high-frequency HF library security door channel HD6680 is a high-performance electronic tag channel device that supports fast anti-collision resolution of ISO/IEC15693 format high-frequency electronic tags, EAS and AFI security detection functions, supports single channel independent work and multi-channel parallel work, supports RS232/RS485 serial communication interface and TCP/IP network interface, and can realize remote centralized configuration and management of channel equipment. It is an ideal choice for high-frequency RFID application systems such as library security anti-theft, archive access control, medical consumables management, intelligent catering self-service cash register, product anti-theft, conference check-in, open access control attendance, logistics management, etc.

RFID high-frequency HF library security door channel HD6680

Product information download:Camp message multimedia page download: