SYD-260AThe moisture tester for petroleum products is based on the standards of the People's Republic of ChinaGB/ T 260The requirements for designing and manufacturing according to the "Method for Determination of Moisture in Petroleum Products" apply toGB/T 260The standard test method is used to determine the moisture content in petroleum products. This instrument is also suitable for pressingGB/T 512The standard for determining the moisture content of lubricating grease specifies the test method for determining the moisture content in lubricating grease. This instrument has a dual structure and can perform tests on two samples simultaneously.

1、 Main technical features

1、SYD-260AThe design of the moisture tester for petroleum products fully complies withGB/ T 260Standard requirements.

2The design of the test vessel clamp is reasonable, and the installation and disassembly of the condenser tube are convenient.

3The heating furnace adopts the form of an electric heating sleeve, without open flames, and is particularly suitable for testing the moisture content of petroleum products in situations where open flames cannot be used.

4The heating power is continuously and infinitely adjustable, and the power size is intuitively displayed by the electric meter. The temperature control method is advanced and reasonable.

5At the same time, parallel tests can be conducted on two samples with high work efficiency.

2、 Main technical parameters and indicators

1Working power supply:AC(220±10%)V，50Hz.

2Heating power of electric furnace:350W×2.

3Heating control: Bidirectional thyristor stepless voltage regulation control.

4Capacity of round bottom glass flask:500ml×2.

5Length of straight condenser tube:250~350Mm. (Double condenser tube)

6Environmental temperature: ≤35℃.

7Relative humidity: ≤85%.

8Power consumption of the whole machine: not greater than900W.