VIP member
Sand core surface drying oven
This product adopts the principle of forced hot air convection heat transfer. The hot air is sprayed onto the surface of the sand mold (core) through
Product details
Product Introduction:
This product adopts the principle of forced hot air convection heat transfer. The hot air is sprayed onto the surface of the sand mold (core) through a nozzle array, and can be uniformly heated and dried on both deep cavities and complex surfaces. The drying time is short and the sand mold absorbs less heat. The system adopts circulating hot air and is equipped with an exhaust device to maintain constant humidity inside the furnace. The heating device is set outside the furnace to prevent the furnace from accumulating heat due to radiation, and to avoid high temperature damage to the resin film of the sand mold (core) due to excessive furnace temperature, which reduces the strength of the sand mold (core).
Technical parameters:
This product adopts the principle of forced hot air convection heat transfer. The hot air is sprayed onto the surface of the sand mold (core) through a nozzle array, and can be uniformly heated and dried on both deep cavities and complex surfaces. The drying time is short and the sand mold absorbs less heat. The system adopts circulating hot air and is equipped with an exhaust device to maintain constant humidity inside the furnace. The heating device is set outside the furnace to prevent the furnace from accumulating heat due to radiation, and to avoid high temperature damage to the resin film of the sand mold (core) due to excessive furnace temperature, which reduces the strength of the sand mold (core).
Technical parameters:
|
Equipment Name: |
Sand core surface drying oven |
Specification and model |
DY-SD-TG |
|
Blast power: |
14 sets * 1100W/380V |
Working temperature range: |
Room temperature+10~200 degrees |
|
Voltage used: |
380V/N+1+Ground/50HZ |
Temperature control accuracy: |
±1℃ |
|
Heating power: |
120KW/3-speed control |
Temperature uniformity: |
± 5 ℃ (no-load test) |
|
Internal configuration: |
According to customer product requirements |
Adapt to the industry: |
Drying of automotive parts products |
|
Overview of Machine Structure: |
This product adopts dual side air outlet and top return air circulation. The heating element is installed in the air ducts on both sides of the box. The circulation motor is installed on the top of the box to extend the service life of the motor. The inlet and outlet use silicone panels as door curtains. |
||
|
Outer wall material of the box: |
2.0mm A3 carbon steel cold rolled sheet metal bending welding rivet splicing |
||
|
Material of box air plate |
1.5mm SUS304 brushed stainless steel sheet metal bending machine punching |
||
|
Box air duct material |
1.0mm SUS304 stainless steel sheet metal bending welding rivet splicing |
||
|
Air supply method: |
Strong pressure circulating air transport |
||
|
Door frame sealing material: |
Import and export use silicone panels as door curtains |
||
|
Temperature control instrument: |
LED LCD screen intelligent digital temperature controller, temperature control accuracy ± 1 ℃, with PID adjustment, automatic temperature control and constant temperature |
||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-