FEATURES

1. Adopting new titanium alloy and stainless steel materials to reduce the influence of environment and temperature on instrument force variation

2. Substitute air damping to reduce the oscillation cycle of the balance and achieve rapid stopping point

3. Substitute optical reading to avoid visual errors and facilitate reading

Maintenance

1. Weighing materials should be done using weighing paper and cups. It is strictly prohibited to directly weigh materials on the weighing platform, and special attention should be paid to avoiding collisions between the weighing pan and the outer pan

2. After using an electronic balance, the weighing platform should be wiped immediately to prevent medication from spilling

3. When weighing toxic and corrosive drugs, special containers should be used to prevent contamination of the balance

4. If there is solid powder adhering to the surface of the electronic balance, first gently remove the powder with a soft bristled brush, and then wipe it with a soft gauze dipped in neutral detergent

5. If there is liquid actually adhering to the surface of the electronic balance, first gently suck off the liquid with a roll of paper, and then useDip a soft gauze into neutral detergent and wipe it clean

6. Regularly ask relevant professionals to calibrate the balance

7. Maintain moderate use of the balance, keep the shell and operation panel intact, and if necessary, use a damp cloth dipped in mild cleaning agent to scrub

8. Keep the calibration weights in a dry and safe place