Mingyang KS-A81 automatic knife cutting

Taiwan Famous Right Angle Milling HeadMainly suitable for CNC gantry milling machines or large vertical machining center machines, with a maximum speed of 3500 revolutions per minute, spindle taper of ISO50, and can be configured with NT50 or BT50 tool holders.

Turn off the motor Z.X.Y.A and return to the mechanical origin.

MDI operation spindle positioning (M19).

Find the direction of the knife buckle and reposition the positioning block (without obstructing the direction of the knife arm buckle).

The knife handle positioning block is semi fixed to the spindle and bearing cover (do not lock the reserved screw hole position).

Adjust the orientation of the knife handle positioning column and the groove of the handle (align the spindle stop block and positioning column orientation).

Manually insert the knife and align it with the positioning block hole and spindle card block, so that the knife handle is ready to enter the knife compartment.

Tighten and fix the two screws of the positioning block (completing the center distance of the positioning block fixation).

Position the knife handle on the ring groove of the school team, align the positioning spring tip piece, and secure 2 120X anti negative screws.

Correct the perpendicularity of the machining steering machine tool (and lock the positioning column ring seat screw to fix the orientation).

Manually retract the blade, insert the blade, and check if the tip of the bullet has entered the positioning groove (it is necessary to use one hand to handle the blade or two people to operate and test several times to ensure that the bullet is correctly inserted into the positioning groove, and use ATC to ensure accuracy).

Manually place the knife handle onto the spindle magazine and eliminate spindle positioning (manually press off).

Can manual, tool handle clamp, and spindle be selected? (If they can be selected, it means that the spindle tip separation is normal. If they cannot rotate, it means that the tip separation is abnormal and the next section of the action needs to be continued. Please check if it is due to the positioning block being too long or too short.).

After the above tests are completed, you can first test the speed in low gear (s200).

After completing the low gear test, increase the speed to high gear in increments.

Manual and segmented ATC testing (performed according to the mechanical manufacturer).

Follow up actions, operate on your own.

Guangzhou MingmaoMechanical and Electrical Equipment Co., Ltd. specializes in agency of trusses, racks, planetary reducers, and dual speed transmissions,Corner milling headLongmen automatic loading and unloading, truss manipulator, V-shaped guide rail rack system, Swedish LinMax rack, gear rack, grinding grade rack, high-quality rack, German STOBER planetary reducer, Taiwan VGM reducer, gear rack reducer, German STOBER dual speed gearbox, high and low speed gearbox, Taiwan Mingyang angle milling head, right angle universal milling head,90 degree angle milling headDouble head output boring and milling head, semi-automatic angle milling head, fully automatic angle milling head. Welcome all major customers to consult, purchase and install!

• contacts:

  Manager Lin

• Telephone:

• Fax:

• Email:

  yapa555@163.com