VIP member
Thick plate leveling machine
The correction wheel uses solid bearing steel, which is ground and plated with hard chromium after high-frequency heat treatment. After being correcte
Product details
The correction wheel uses solid bearing steel, which is ground and plated with hard chromium after high-frequency heat treatment. After being corrected by this machine, it is smooth and without indentation, without damaging the surface of the material;
This machine can be used independently, and can also be used in conjunction with MT and MTD automatic feeding racks, with good results;
This machine adopts a large cylinder for material pressing, and the correction adjustment adopts synchronous worm gear and worm gear adjustment. Rotate the handle once to adjust the upper wheel by only 1mm for fine tuning;
High rigidity mechanical structure, high horsepower output. Can provide high-speed and stable feeding, improve production efficiency, and extend equipment service life.
| Type TYPE | TLH-150 | TLH-200 | TLH-300 | |
| Material Width | mm | 150 | 200 | 300 |
| Material Thickness | mm | 0.5-4.5 | 0.5-4.5 | 0.5-4.5 |
| Adjusting Speed | m/min | 15 | 15 | 15 |
| Motor Motor | HP | 2 | 2 | 3 |
| Mechanical length * width * height Machine L * W * H | m | 2.1*0.65*1.6 | 2.1*0.7*1.6 | 2.1*0.8*1.6 |
| Type TYPE | TLH-400 | TLH-500 | TLH-600 | TLH-800 | |
| Material Width | mm | 400 | 500 | 600 | 800 |
| Material Thickness | mm | 0.5-4.5 | 0.5-4.5 | 0.5-4.5 | 0.5-4.5 |
| Adjusting Speed | m/min | 15 | 15 | 15 | 15 |
| Motor Motor | HP | 3 | 5 | 5 | 7.5 |
| Mechanical length * width * height Machine L * W * H | m | 2.1*0.9*1.6 | 2.1*1.0*1.6 | 2.1*1.1*1.6 | 2.1*1.3*1.6 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-