VIP member
UL Spray Test Device/UL45 ° Spray Test Device
*Dimensions: Length 1500x Width 800x Height 2000mm (Height adjustable, 1000-2000mm); *The height of the intersection point of the nozzle water column
Product details
*shapeSize: Long1500xwide800xHeight 2000mm（Height can be adjusted freely, ten00~2000mm)；
*The height from the intersection point of the nozzle water column to the ground0-1000mmAdjustable;
*Nozzle holder movement method: free lifting and lowering;
*Bracket material: industrial aluminum profile, bracket base adopts universal brake casters;
*The entire device has3individualULinlet nozzle,Each nozzle has a water pressure gauge.
Purpose:
This test device is suitable for waterproofing the outer shell of lamps, electronics, electrical appliances, and communication productsTested in accordance with UL standards. The water source during the experiment should be clean water with a constant flow rate, and the water flow rate should be10L/min±5%Ensure that the water flow velocity and pressure are50~150kpaThe experimental device is easy to install, easy to operate, and cost-effective.
Main technical parameters:
Type A: UL Sprinkler Testing Device Model: UL-2000
1.Use water source: Ensure that the water flow pressure is50~150kpaClear water inside；
2.The experimental water flow rate is ≥10L/min；
3. Precision pressure gauges: four,Range of water pressure gauge:0~0.25mpa；
4. Three UL nozzles in the United States,The nozzle hole conforms toUL60507picture38.2The requirements in;
5.booster water pump.
Type B: UL45 ° Splash Test Device Model: UL-45 °
1. Sample holder: SUS304 stainless steel material；
2.Test water pressure:50~150kpa；
3. One booster pump；
4. Precision pressure gauge: 1,Range of water pressure gauge:0~0.25mpa；
5. One UL nozzle from the United States.
Compliant with standards:
ULThe water spray test device is based onUL60507-ENGL 1999Standard diagram38.1, picture38.2The requirements and《ANSI Z21.10.3-2004》With《ANSI Z21.58In the standardFigure 10/Figure 11Terms and Conditions《CSA4.3-2004》Manufacturing according to standards to meetUL1598, UL153, UL1703, UL1741, UL514B, UL1278, UL1571, UL588, etctreetopaccurate
Rain-TestSprayHeads From UL
ULThe nozzle complies with relevant standards such as UL60507-ENGL 1999, UL484-34, ANSI Z21.10.3-2004, ANSI Z21.58, ANSL B94.11M, CSA4.3-2004, and UL1278 standard figures 49.1, 49.2, and clause 49. A nozzle: 3 pieces/set, B nozzle: 1 piece/set, both imported with original packaging and manufactured by UL laboratory in the United States.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-