Why is this moisture analyzer called a "halogen" moisture analyzer?

Due to the use of halogen lamps as heating sources, this moisture analyzer is commonly referred to as halogen moisture analyzer or halogen lamp moisture analyzer.

The working principle of halogen lamp in halogen moisture analyzer:

The halogen lamp used in the moisture analyzer, also known as tungsten halogen bulb, is a variant of incandescent lamp with better performance. The principle is to inject halogen gases such as iodine or bromine into the light bulb. At high temperatures, the sublimated tungsten wire reacts chemically with the halogen, and the sublimated tungsten will re solidify on the tungsten wire, forming a balanced cycle to avoid premature breakage of the tungsten wire. Therefore, halogen bulbs have a longer lifespan than incandescent bulbs. Meanwhile, due to the ability of the filament to operate at high temperatures, higher brightness, color temperature, and luminous efficiency are achieved.

JT-K10 Universal Halogen Moisture Analyzer Application Fields:

The Jingtai brand JT-K series rapid moisture analyzer is used in industries that require rapid moisture measurement. It can measure any particle, powder, sheet, or non-volatile liquid, such as the pharmaceutical industry, chemical industry, electronics and semiconductor industry, plastic raw materials, rubber, tobacco, tea, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, and so on. The JT-K series moisture analyzer is an ideal choice for measuring moisture in the production process of enterprises and laboratories.

Working principle of JT-K10 universal halogen rapid moisture analyzer:
Traditional moisture measurementUsually, the oven drying method is used, and the testing of a sample takes two to three or even three to four hours, and it also requires weighing with a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of oven method for moisture determination cannot meet the fast-paced production needs of enterprises. The Jingtai JT-K series rapid moisture analyzer is a newly developed rapid moisture analyzer by Taizhou Jingtai Instrument Co., Ltd. It uses a high-power drying heater ring halogen lamp to quickly and uniformly heat the sample, and the moisture content of the sample is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.

The Jingtai brand JT-K series rapid moisture analyzer applies the principle of oven drying method, and the measurement results have good consistency with the oven method moisture measurement, but the work efficiency is much higher than that of the oven method moisture measurement. By using the Jingtai brand JT-K series rapid moisture analyzer, samples can generally be measured in just a few minutes, which has been favored and praised by a large number of users.

How to operate the Jingtai brand halogen moisture analyzer?

Many customers have inquired about how to operate the JT-K series halogen moisture analyzer and whether the operation is cumbersome.

The JT-K series halogen moisture analyzer from Jingtai brand is a high-tech moisture analyzer that provides very accurate measurement data, but is extremely easy to use and does not require special training. The operation steps are as follows:
Firstly, evenly place the sample to be tested into the sample tray, then cover it with a heating cover, and finally press the "start" button. The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically sound an alarm, and the measurement result will be locked on the LCD display screen.

Jingtai brand JT-K10 new halogen moisture analyzer halogen rapid moisture analyzer features:
1. No installation or debugging required, can be used after unpacking;
2. No need for training, simple operation, saving tedious usage steps;
3. Short measurement time and high work efficiency;
4. Uniform heating, stable performance, and accurate testing;
5. Small size and light weight;
6. Fully automatic measurement, alarm reminder after measurement completion, no need to supervise the measurement process;
7. Widely used and almost applicable for moisture determination in various industries;
8. German imported sensors make instrument testing more effective and accurate;
9. The exquisite windproof cover design makes the instrument weighing system more stable;
10. The moisture and solid content of the sample can be converted simultaneously;
11. The heating chamber adopts a pure stainless steel chamber cover, which is heat-resistant and easy to clean.

Jingtai brand JT-K10 new halogen moisture analyzer halogen rapid moisture analyzer technical parameters:

Moisture content measurement range: 0.01% -99%

Solid content determination range: 99% -0.01%

Larger weight: 110g

Weighing accuracy: 0.001g

Moisture content readability: 0.01%

Heating temperature: 40-200 ℃

Display content: moisture content, solid content, time, temperature, weight

Display mode: LCD screen with backlight source

Weighing sensor: German imported sensor to ensure measurement accuracy

Temperature sensor: High precision PT100 platinum thermistor

Power supply: Voltage 220V ± 10%, Frequency 50HZ ± 1HZ
Weighing tray size: diameter 90mm

Working environment temperature: 5 ℃ -35 ℃ is better

Dimensions: 380mm × 200mm × 180mm
Net weight: 5.8kg

Jingtai Instrument Tips:Halogen Moisture Analyzer, also known as Halogen Moisture Analyzer, Halogen Rapid Moisture Tester, Halogen Rapid Moisture Tester, Halogen Rapid Moisture Analyzer, Halogen Lamp Moisture Analyzer, Halogen Moisture Measuring Instrument, Halogen Moisture Detector, etc.

Precautions for using halogen moisture analyzer:

The Jingtai brand JT-K series new halogen moisture analyzer produced by Taizhou Jingtai Instrument Co., Ltd. is easy to operate, accurate in measurement, and fast in measurement time, and is highly welcomed by users. Jingtai Instrument kindly reminds that when using the JT-K series halogen moisture analyzer, the following precautions should be taken:
1. Halogen moisture analyzer is used to measure the moisture content in samples, and any other use may cause harm to individuals and damage to the instrument.
2. Please read the instructions carefully before use and do not use in environments that do not meet the requirements.
3. The halogen rapid moisture analyzer is only for those familiar with sample properties and trained Personnel use.
4. The power supply of the halogen rapid moisture analyzer is a three pin grounded socket. It is prohibited to disconnect the instrument's grounding wire or use a power supply that is not well grounded.
5. Adequate space should be ensured around the instrument to prevent heat accumulation and overheating.
6. Do not place flammable materials around the instrument as the area around the heating unit may become hot.
7. After the test is completed, due to the fact that the sample itself, heating unit, and its container will still be very hot, caution should be taken when removing the sample.
8. During the heating and drying process, the temperature of the ring-shaped heating components will reach 400 ℃. Therefore, do not open or touch the heating unit. If you need to turn it on, please disconnect the power and wait until it completely cools down.
9. Be particularly careful with flammable or combustible materials, solvent containing substrates, and substrates that produce flammable or explosive gases when heated, as these samples may pose a risk to human health or damage equipment. Therefore, when measuring such samples, the operating heating temperature should be sufficiently low to prevent the formation of flames or explosives, and protective equipment such as goggles should be worn. If the combustibility of the sample is not well understood, the amount of test sample should be minimized as much as possible. In this case, the instrument should be supervised by a dedicated person just in case. Please conduct a risk analysis before the experiment.
10. For matrices containing toxic elements, they can only be heated and dried under well ventilated conditions.
11. A substrate that generates corrosive steam during heating and drying. When measuring samples of this substrate, it is recommended to reduce the sample weight as the steam will condense on the colder outer shell and cause corrosion.

How to calibrate a halogen moisture analyzer?
A customer has purchased the JT-K series halogen rapid moisture analyzer from Jingtai brand and does not know how to calibrate it. In fact, if users carefully read the user manual, they will know how to quickly calibrate the halogen rapid moisture analyzer.
Firstly, place the JT-K series halogen moisture analyzer on a horizontal operating table or tabletop, and adjust the bubble inside the level behind the instrument to the middle position, so that the instrument is in a horizontal state. If the instrument is not leveled, the built-in weighing system will not work properly, or the measurement will be inaccurate.
When the moisture meter is used for the first time, or when errors or improper use cause inaccurate readings, calibration weights can be used to adjust accuracy.
Press and hold the "RESET" button until it displays "cal", then flash 100.000. Place the calibration weight, and at this point, "====" appears. When "100.000" appears again, remove the weight, and at this point, "====" appears. Wait until "0.000" appears, and the calibration is complete.