Product Features:

uAdopting a 3.5-inch 65535 color TFT display screen; Isolated RS232 and RS485 communication interfaces;

uReal time force curve display and curve capture;

uIsolated 4-channel external input, 4-channel transistor emitter open circuit output;

uCapable of Modbus continuous output or Modbus RTU communication protocol; 4-20mA or 0-10V analog output interface;

uPeak value, real-time value, and testing process curve are displayed on the same screen, which can monitor and trace the entire testing process;

uThe fracture alarm value, fracture alarm dead zone/upper and lower limit deviation values can be freely set;

uChoose any alarm within the upper and lower limits, alarm outside the upper and lower limits, or alarm for breakage;

uAfter reaching the alarm value, the buzzer, display screen, and external output will simultaneously prompt an alarm.

uThree units of g (mN/mlb/pa), kg (N/lb/kpa), and t (KN/Klb/Mpa) can be freely selected;

uEquipped with peak holding function, automatic peak release, and adjustable release time;

u100 sets of test reports can be permanently saved, including test time, peak value, valley value, average value, etc;

uThe last captured curve can be saved without power outage, and the entire testing process can be traced back;

uBuilt in graphic and textual instructions, with intuitive and clear operations;

uBy using dedicated testing software on the PC, unlimited storage, transmission, and traceability of test curve data can be achieved;

uVarious testing machines can be selected to achieve various tests.

Instrument dimension diagram: