The device adopts the float measurement method. In the mold cooling circuit, the conical measuring device will float upward under the action of water flow, and the flow rate will be measured and indicated through this floating value.


Technical Specifications

• Flow range of each circuit: Standard type 1-10 liters/minute;

• When requested by the customer, AI and PVC conical floats can also be provided.

• Standard Type: Mold with 12mm copper connector for connecting 3/8 'hoses.

• When requested by the customer: G 3/8 'copper threaded sleeve with a 14mm copper threaded joint can be provided for connecting 1/2' hoses, or a 20mm copper threaded joint can be provided for connecting 3/4 'hoses.

Flow control device with maintenance free flow measurement system,
Suitable for water or a mixture of water and ethylene glycol.

Standard equipment

• 7-zone display screen, capable of displaying actual parameter values, extremely easy to use.

• Can monitor the flow and temperature of each circuit (WFC 160: only has flow monitoring function).

• The control valve between the mold inlet circuit and the return circuit (WFC 160 is not applicable).

• Serial interface (20mA, RS232, RS485).

• Isolated alarm contacts.

• Two circuits with operation panel.

A closed-loop circuit can shorten the preheating time of the mold. Continuous control function ensures the provision of cooling water flow when cooling is required, while avoiding cooling of the mold during production stoppage.

Control and perfect processing monitoring

• Automatically and systematically control the mold temperature to ensure temperature stability.

• This device is the culmination of years of experience from Weimeng.

• The microprocessor control accuracy is+/-1C °.

• Up to 8 partitions can be controlled.

• Can store settings parameters for 7 different molds.

• The allowed temperature range can be set on the monitor. If the temperature exceeds this range, the alarm buzzer and alarm contactor will be activated.

• Equipped with a serial interface, it can transmit data according to IMM standards.

• By perfectly controlling and monitoring the temperature, the quality of the molding process can be ensured.

• A plunger type solenoid valve with a larger valve seat diameter can operate normally even when the water quality is poor.

•