The XBD-W fire pump series is a horizontal, single suction multi-stage, segmented structure developed and produced energy-saving series products. Its performance parameters and technical indicators comply with relevant standards, and it has significant advantages such as high efficiency, low operating noise, good anti cavitation performance, reasonable structure, and long service life. The XBD-W fire pump series has a total of 5 varieties and 40 specifications, with a performance range of rated flow of 5-40L/s, pressure range of 0.18-2.0MPa, supporting power range of 2.2-180kW, and caliber range of φ 50~φ 150mm. The XBD-W fire pump set can be used to transport clean water without solid particles and liquids with physical and chemical properties similar to water. Mainly used for boosting water supply in fire protection systems, it can also be applied to water supply and drainage in factories and mines, boosting water supply in high-rise buildings, long-distance water supply, heating, bathroom, boiler cold and warm water circulation boosting, air conditioning refrigeration system water supply and equipment matching, and other occasions.

The significance of XBD-ISW horizontal fire pump model

The XBD-ISW horizontal fire pump is mainly used for pressurized water supply in fire protection system pipelines. It can also be applied to industrial city water supply and drainage, high-rise building pressurized water supply, long-distance water supply, heating, bathroom, boiler cold and warm water circulation pressurized air conditioning refrigeration system water supply and equipment matching, replacing the original IS centrifugal pump.

1. The pump has a compact structure, small volume, and beautiful appearance. Its vertical structure determines a small installation area, and its center of gravity coincides with the center of the pump foot, thereby enhancing the stability and service life of the pump.
2. The suction and discharge ports of the pump are both horizontal, simplifying the connection of the pipeline.
3. Multi level can be installed as needed, with the suction and discharge ports installed in the same direction or in different directions such as 90 °, 180 °, and 270 ° to meet different connection scenarios.
4. The pump pressure can be adjusted by increasing or decreasing the number of pump stages and cutting the outer diameter of the impeller as needed, without changing the installation footprint, which is not available in other types of pumps.
5. The pump rotor has a small degree of winding, smooth operation, low vibration, low noise, and long service life.

1. Suitable for transporting clean water and substances with physical and chemical properties similar to clean water, with a solid insoluble volume not exceeding 0.1% per unit volume and a particle size ≤ 2mm
2. Medium temperature: -15 ℃~80 ℃;
3. Work pressure: System pressure ≤ 3.0MPa; (i.e. system pressure=inlet pressure+pressure during pump operation ≤ 3.0MPa)
4. The ambient temperature should be below 40 ℃ and the relative humidity should be below 95%;
5. Due to the fact that the main components of this pump are made of cast iron, the medium it transports should not have strong corrosiveness.
Note: If the medium contains small particles or has strong corrosiveness, please specify it when ordering to provide more reliable products.

1. Inhalation chamber: designed using an excellent hydraulic model.
2. Impeller: Designed with excellent hydraulic models, it is highly efficient and energy-saving.
3. Pump body: Designed using an excellent hydraulic model.
4. Pressure plug: Install pressure gauge and vacuum gauge to monitor the normal and efficient operation of the pump.
5. Air release plug: Ensure proper maintenance of the pump.
6. Mechanical seal: Made of materials such as stainless steel, hard alloy, fluororubber, etc., it is durable for consumer wear and tear, leak free, and has a long operating life.
7. Pump shaft: Extend the shaft of the motor to ensure its concentricity, ensuring smooth operation without noise or vibration.
8. Water blocking ring: prevents water from entering the motor due to sealing leakage.
9. Y series electric motor: directly connected to the water pump to transmit power, some of which use Shanghai famous brand motors.

model	Traffic Q (L/s)	outlet pressure (MPa)	Speed (r/min)	Power P (Kw)	Efficiency η (%)
XBD3.0/5-50(65)	5	0.30	2900	4	63
XBD3.2/5-50(65)		0.32
XBD3.4/5-50(65)		0.34
XBD4.6/5-50(65)	5	0.46	2900	7.5	58
XBD4.8/5-50(65)		0.48
XBD5.0/5-50(65)		0.50
XBD7.6/5-50(65)	5	0.76	2900	15	50
XBD7.8/5-50(65)		0.78
XBD8.0/5-50(65)		0.80
XBD11/5-50(65)	5	1.10	2900	30	40
XBD12/5-50(65)		1.20
XBD12.5/5-50(65)		1.25
XBD3.0/10-65(80)	10	0.30	2900	7.5	71
XBD3.2/10-65(80)		0.32
XBD3.4/10-65(80)		0.34
XBD4.6/10-65(80)	10	0.46	2900	15	67
XBD4.8/10-65(80)		0.48
XBD5.0/10-65(80)		0.50
XBD7.6/10-65(80)	10	0.76	2900	22	59
XBD7.8/10-65(80)		0.78
XBD8.0/10-65(80)		0.80
XBD11/10-65(80)	10	1.10	2900	37	54
XBD12/10-65(80)		1.20
XBD12.5/10-65(80)		1.25
XBD3.0/25-80(100)	25	0.30	2900	15	76
XBD3.2/25-80(100)		0.32
XBD3.4/25-80(100)		0.34
XBD4.6/25-80(100)	25	0.46	2900	22	74
XBD4.8/25-80(100)		0.48
XBD5.0/25-80(100)		0.50
XBD7.6/25-80(100)	25	0.76	2900	37	69
XBD7.8/25-80(100)		0.78
XBD8.0/25-80(100)		0.80
XBD11/25-80(100)	25	1.10	2900	75	69
XBD12/25-80(100)		1.20
XBD12.5/25-80(100)		1.25
XBD13/25-80(100)	25	1.30	2900	90	57
XBD14/25-80(100)		1.40
XBD15/25-80(100)		1.50
XBD3.0/45-100(125)	45	0.30	2900	22	73
XBD3.2/45-100(125)		0.32
XBD3.4/45-100(125)		0.34
XBD4.6/45-100(125)	45	0.46	2900	37	77
XBD4.8/45-100(125)		0.48
XBD5.0/45-100(125)		0.50
XBD7.6/45-100(125)	45	0.76	2900	55	80
XBD7.8/45-100(125)		0.78
XBD8.0/45-100(125)		0.80
XBD11/45-100(125)	45	1.10	2900	90	70
XBD12/45-100(125)		1.20
XBD12.5/45-100(125)		1.25
XBD2.8/55-150(200)	55	0.28	1450	30	78
XBD3.0/55-150(200)		0.30
XBD3.2/55-150(200)		0.32
XBD4.6/55-150(200)	55	0.46	1450	45	75
XBD4.8/55-150(200)		0.48
XBD5.0/55-150(200)		0.50
XBD7.6/55-150	55	0.76	2900	75	76
XBD7.8/55-150		0.78
XBD8.0/55-150		0.80
XBD11/55-150	55	1.10	2900	110	73
XBD12/55-150		1.20
XBD12.5/55-150		1.25
XBD13/55-150	45	1.30	2900	110	80
XBD14/55-150		1.40
XBD15/55-150		1.50
XBD4.6/100-200	100	0.46	1450	75	81
XBD4.8/100-200		0.48
XBD5.0/100-200		0.50
XBD3.0/150-250	150	0.30	1450	75	80
XBD3.2/150-250		0.32
XBD3.4/150-250		0.34
XBD4.6/140-250	140	0.46	1450	90	72
XBD4.8/140-250		0.48
XBD5.0/140-250		0.50
XBD2.4/200-300	200	0.24	970	75	81
XBD2.6/200-300		0.26
XBD2.8/200-300		0.28
XBD2.8/200-300(350)	200	0.28	1450	90	84
XBD3.0/200-300(350)		0.30
XBD3.2/200-300(350)		0.32
XBD4.0/200-300	200	0.40	970	132	84
XBD4.2/200-300		0.42
XBD4.4/200-300		0.44
XBD4.6/160-300	160	0.46	1450	110	78
XBD4.8/160-300		0.48
XBD5.0/160-300		0.50
XBD4.6/200-350	200	0.46	1450	160	83
XBD4.8/200-350		0.48
XBD5.0/200-350		0.50
XBD2.8/300-400	300	0.28	1450	132	76
XBD3.0/300-400		0.30
XBD3.2/300-400		0.32
XBD2.8/330-500	330	0.28	1450	160	78
XBD3.0/330-500		0.30
XBD3.2/330-500		0.32