YAMAHA High Performance Small Printing Machine YCP10

Features: Achieving printing quality equivalent to that of higher-level printing machines, supporting large substrates and wide screen boards

● High speed printing performance 8sec/cycle

Repetitive alignment accuracy (6 σ): ± 0.010mm

● Supports large substrates L510 × W460mm

The size of the mesh board is MAX.L750 × W750mm

② Inheriting the functions of high-end machines, achieving high-precision and high-quality printing

Yamaha's exclusive 3S scraper head (3S: Swing Single Squeezee)

The printing angle (45-65 ° - one degree) and speed of the scraper can be freely set or changed through the program, and printing can be carried out under optimal conditions according to the solder paste used.

● Mesh board adsorption

Through the adsorption function of the mesh board, stable high-precision printing can be achieved without being affected by the bending of the mesh board. No need to input offset when printing back and forth, greatly reducing switching time

● Fill correction function

Correcting the solder paste filling amount on the printed substrate after cleaning the screen can reduce the probability of printing deviation and stabilize the printing quality

③ A small body that combines high versatility and multifunctionality

● Supports large substrates and wide mesh boards

Featuring a compact body with a width of only 1130mm, it supports large substrates of L510 × W460mm and various substrate specifications. It can shorten the production line and improve production efficiency.

Printing inspection function

● Image alignment

● Automatic cleaning system (can freely set cleaning mode and speed)

Cleaning agent bottle (The installation position of the large capacity cleaning agent bottle is designed on the front of the printing machine. It can not only replenish the cleaning agent during the printing process, but also facilitate the viewing of the remaining amount of cleaning agent)

④ Support Yamaha SMT production line interconnection function to achieve efficient production

● IP Option (optional)

Manage the IDs of solder paste, mesh board, and scraper through barcodes, and compare the substrate data with the actual operation during the switching process to prevent incorrect installation. In addition, it is also possible to manage the shelf life of solder paste (moisture period, oxidation period, shelf life)

● Solder paste residual detection function (optional)

Regularly (once/round trip) measure the rolling width of solder paste on the mesh board. Prevent operators from missing the replenishment opportunity or forgetting to replenish through alarm and other means

● Defective board marking transmission (optional)

Transfer the bad board marking information identified by YCP10 to the surface mount machine to reduce the loss of production cycle time and improve production efficiency

Yamaha SMT

⑤ Rich option configuration

● Printing inspection camera ● Temperature control device ● IP option

● Substrate adsorption and fixation system ● Temperature controlled transformer ● Solder paste residue detection

● UPS system ● Double scraper ● Defective board marking transmission

Basic specifications and parameters

1. Model: Yamaha YCP10

2. Object substrate: L510 x W460mm~L50 x 50mm

3. Printing head: 3S scraper head, dual scraper head (optional)

4. Printing accuracy: Repetitive alignment accuracy (6 σ): ± 0.010mm

5. Printing production cycle: 8 seconds (standard printing: under the best conditions of our company, except for printing time)

6. Applicable mesh board sizes: L750 x W750mm, L736 x W736mm, L750 x W650, L650 x W550mm

L600 x W550mm (optional), L550 x W550mm (optional), L584 x W584mm (optional)

7. Power specifications: single-phase AC200/208/220/230V ± 20V 50/60Hz

8. Supply gas source: above 0.45MPa, in a clean and dry state

9. Dimensions: L1130mm x W1760mm x H1370mm

10. Main body weight: approximately 1100kg