YMCQ series magnetic pump-Global supplier

No. 8 Xinjiang Road, Xinqiao Industrial Park, Jingjiang Industrial and Economic Development Zone, Jiangsu Province

overview

YMCQThe series of magnetic drive pumps is a high-tech product that applies the working principle of permanent magnet couplings to centrifugal pumps. The pump design adopts the ISO2858 standard. Magnetic pumps are designed to solve the liquid transportation problems of flammable, explosive, volatile, toxic, and precious materials in various process flows. This pump has the advantages of full sealing, no leakage, no pollution, low vibration, and low noise, and is widely used in industries such as petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing, water treatment, and national defense.

This product is not suitable for conveying media containing ferromagnetic substances, hard particles, and rapid crystallization.

Structural characteristics
1. The magnetic transmission device uses the magnetic force generated by magnetic materials to achieve power transmission. The magnetic transmission part is composed of inner and outer magnetic steel, and an isolation sleeve is used to isolate the inner and outer magnetic rotors. The motor drives the outer magnetic steel and utilizes the magnetic coupling characteristics to drive the inner magnetic steel rotor during operation, completing non-contact torque transmission.

2. Low noise and minimal vibration. The power transmission system of a magnetic pump does not have a rigid connection, and the pump shaft and motor shaft rely on magnetic coupling for torque transmission. The inner rotor is supported by sliding bearings, which have extremely high concentricity and perpendicularity. When the pump is running, except for the vibration and noise of the motor itself, there is basically no pump.
3. This pump hasAxial force balance system andUnique lubrication and cooling circuits. The balance plate, shaft sleeve, and sliding bearing inside the pump are made of hard alloy. During operation, some process fluids self lubricate and cool the transmission components, resulting in low wear, low failure rate, long maintenance cycle, and long service life.
4. This series of pumps replaces dynamic seals with static seals, keeping the pump chamber in a completely sealed state, eliminating shaft seals, and using magnetic coupling to indirectly drive, eliminating the troubles of "running, emitting, dripping, and leaking", with no leakage or pollution.

Material of pump overcurrent components

According to the different properties of the conveying medium, various grades of metal materials (304, 316L, duplex stainless steel, etc.) can be selected. According to the temperature of the medium, corresponding magnetic steels such as samarium cobalt and neodymium iron boron can be selected.

Model Meaning

YM CQ 50-32-160 B/ Z（G）

YM- Yamei code

CQMagnetic driven pump

50- Pump inlet diameter (mm)

32- Pump outlet diameter (mm)

160- nominal diameter of impeller

B-Stainless steel material

Z-Self suction

(G) - High temperature type

performance parameter

YMCQtype Magnetic pump	internet trafficQ Capacity	liftH Head	electrical machinery power Power	rated rotational speed Speed	Must be gasoline Corrosion allowance (NPSH)r	internet trafficQ Capacity	liftH Head	electrical machinery power Power	rated rotational speed Speed	Must be gasoline Corrosion allowance (NPSH)r
YMCQtype Magnetic pump	m³/h	m	kW	r/min	m	m³/h	m	kW	r/min	m
YMCQ25-25-125	3.2	20	1.5	2950	5.0	1.6	5	0.55	1450	2.5
YMCQ25-25-160	3.2	32	3	2950	3.8	1.6	8	0.55	1450	2.0
YMCQ25-25-200	3.2	50	5.5	2950	4.0	1.6	12.5	0.75	1450	2.0
YMCQ25-25-250	3.2	80	7.5	2950	4.5	1.6	20	1.5	1450	2.3
YMCQ40-32-125	6.3	20	2.2	2950	5.0	3.2	5	0.55	1450	2.5
YMCQ40-32-160	6.3	32	3	2950	3.8	3.2	8	0.75	1450	2.0
YMCQ40-32-200	6.3	50	5.5	2950	3.5	3.2	12.5	0.75	1450	1.8
YMCQ50-32-125	12.5	20	3	2950	2.0	6.3	5	0.55	1450	1.0
YMCQ50-32-160	12.5	32	4	2950	2.0	6.3	8	0.75	1450	1.0
YMCQ50-32-200	12.5	50	7.5	2950	2.0	6.3	12.5	1.1	1450	1.0
YMCQ65-50-125	25	20	3	2950	2.0	12.5	5	0.55	1450	1.2
YMCQ65-50-160	25	32	5.5	2950	2.0	12.5	8	1.1	1450	1.2
YMCQ65-40-200	25	50	11	2950	2.0	12.5	12.5	1.5	1450	1.2
YMCQ65-40-250	25	80	18.5	2950	2.0	12.5	20	3	1450	1.2
YMCQ65-40-315	25	125	30	2950	2.0	12.5	32	5.5	1450	1.2
YMCQ80-65-125	50	20	5.5	2950	3.0	25	5	1.1	1450	1.5
YMCQ80-65-160	50	32	11	2950	2.3	25	8	1.5	1450	1.1
YMCQ80-50-200	50	50	18.5	2950	2.5	25	12.5	2.2	1450	1.1
YMCQ100-80-125	100	20	11	2950	4.2	50	5	1.5	1450	2.0
YMCQ100-80-160	100	32	18.5	2950	4.3	50	8	3	1450	2.1
YMCQ100-65-200	100	50	37	2950	3.9	50	12.5	4	1450	1.8
YMCQ100-65-250						50	20	5.5	1450	1.8

*This parameter table may not fully list the pump models and parameters. Please consult for details400-6636-008.

*The power of the motor used for this pump is similar to that of clean water in terms of medium density and viscosity. When ordering, please consider factors such as medium density, viscosity, and usage environment.